-
About AUTOSTAR
-
Products & Solutions
-
-
CONTACT US
M315-0001
- Commodity name： M315-0001
- Product Description
- 右侧描述
-
System wiring connection
1. Connect power wire
2. Connect left turning light wire
3. Connect right turning light wire
4. Connect reverse light wire
5. Connect ground
6. Connect Trigger wire
System wiring diagram
Radar Installation
(1) Installation height range
(2) Horizontal mounting angle
The angle between the normal line of the rear radar and the body line is 30°±2° (see figure below). Make sure the logo is up.
(3) Radar vertical mounting angle requirements
Display Installation
（1）Select a suitable location for installation at the 2 positions A,B in the figure below so that the driver can easily observe the display;
（2）Clean the surface of the mounting position, use 3M adhesive to stick the monitor on the car body, or use self-tapping screws to lock the display onto the car body.
Left-hand drive installation schematic
Technical parameters
Specification Item Performance indicators Operating Voltage 9-36V Current Consumption (mA) <600mA@12V Working Temperature (°C) -40 — 80 Storage Temperature (°C) -40 — 85 Operating frequency (GHz) 77 - 81 Transmit Power (dBm) 12 Modulation Mode FMCW Antenna Form 2TX，4RX Vertical Angle (°) 30 Horizontal Angle (°) 180 Angular Accuracy (°) ±0.5 Angular Resolution (°) 15 Distance Resolution (m) 0.04m Distance accuracy ±0.02m
Request
* Note: Please ensure the information is filled in correctly and maintain smooth communication. We will contact you as soon as possible!
Related
Xiamen Autostar Electronics Co., Ltd
No.190,Siming Park,Tong'an Industrial District, Xiamen,Fujian,361100,China