Language

AI MDVR

AI DMS

Commodity name： AI DMS

DMS is a driving assist warning product based on device vision technology. The system achieves realtime recognition of driver fatigue and distraction status by analyzing the facial expression features of the driver, and provides alarm information. At the same time, the detection results can also be sent to the platform through the 4G module to achieve remote monitoring of the driver's status, providing safety protection services for drivers, passengers, operating units, and regulatory departments throughout the process, effectively avoiding the occurrence of dangerous situations. This product is suitable for various vehicle types such as commercial vehicles, school buses, taxis, buses, passenger cars, etc.

Type:

AI DMS

Email:

jacky@auto-star.com.cn

Telephone:

+86 592 726 1811

Request Now

Related Products

Product Description
右侧描述

Appearance size

Specification

Item	Specification
Operating Voltage	9-16V
Operating Current	< 200mA@12V
Working Temperature	-20 ~ 70°C
Store Temperature	-40 ~ 85°C
Image sensor	1/3 inch 1920(H)
Resolution	FAHD 1080P PAL or NTSC
FOV Angle	H: 66° V: 38°

System Function---Self Diagnosis

If the self-check is successful, the system will “Di” once. The LCD will shows green icon(see below) for 10 sec.If the self-check fails, the system will “Di-Di” twice. The LCD will shows yellow icon(see below) until fault is resolved.

System Function---Fatigued

When driver opens mouth and yawns for more than 2 seconds, DMS system will enter the fatigued alarm. When driver closes eyes for more than than 2 second,
DMS system will enter the fatigued alarm. In the fatigued alarm state:
1) The speaker prompts "Do not drive while fatigued" and
the alarm interval is 10 seconds.

2) The video shows a OSD picture as above.

3) The LCD will shows a red icon as above.

System Function---distracted

When driver lowering/raising his head is greater than 20 degrees and the time is greater than 3 seconds, DMS system will enter the distracted alarm. When the deviation of the facial direction from the calibrated yaw angle is greater than 45 degrees and the time is greater than 3 seconds, DMS system will enter the distracted alarm.
In the distracted alarm state:
1) The speaker prompts "Remain focused on the road" and
the alarm interval is 10 seconds. 2) The video shows a OSD picture as above. 3) The LCD will shows a red icon as above.

System Function---Phone

When driver is using a mobile phone for more than 2 second：
1) The speaker prompts “Do not use your phone whilst driving", the alarm interval is 10 seconds .

2) The video shows a OSD picture as above. 3) The LCD wills shows a red icon as above.

System Function---Smoking

When there is cigarette and duration time is more than 1 second：
1) The speaker prompts “No smoking", the alarm intervalis 10 seconds.

2) The video shows a OSD picture as above. 3) The LCD will shows a red icon as above.

System Function---Obstruction

If the DMS camera is blocked and time last for 3s:
1) The speaker prompts “An obstruction has been detected", the alarm interval is 10 seconds.

2) The video shows a OSD picture as above. 3) The LCD wills shows a red icon as above.

System Function---Seatbelt

When the seatbelt cannot be detected for 10 seconds:
1) The speaker prompts “Please fasten your seatbelt",the alarm interval is 30 seconds.

2) The video shows a OSD picture as above. 3) The LCD wills shows a red icon as above.

System Function

When drvier not be detected for 10 seconds:
1) The speaker prompts “Driver not detected", thealarm interval is 30 seconds.

2) The video shows a OSD picture as above. 3) The LCD wills shows a red icon as above.

System Function---Low speed

When the speed is below the low speed threshold vaule,DMS will stop alarm function. The default low speed threshold vaule is 20Km/h. It can be change by remote command.

System Function---Button Function

Press the button, the alarm function of DMS will be disable. And LCD shows icon as above picture. Press the button again, the alarm function of DMS will be enable. After power on again, the alarm function of DMS will be restored.

System Function--Communication

Communication function with RS232
1, Upload DMS alarm information;
2, Upgrade software.

3, Air upgrade.

4, Set the low speed and high speed threshold value.

5, Other applications etc.

Request

* Note: Please ensure the information is filled in correctly and maintain smooth communication. We will contact you as soon as possible!